Discover our standardized and customizable OEM/ODM turbine systems. Engineered with permanent magnet generators (PMG), ultra-low cut-in speed aerodynamics, and heavy-duty C5-M anti-corrosion protection specifically tailored for the Greater Jakarta industrial ecosystem.
As the capital region of Indonesia transitions toward decentralized energy infrastructure under the national energy plan (RUKN), the demand for high-reliability Horizontal Axis Wind Turbines (HAWT) across Special Economic Zones (SEZs) and industrial corridors in Jabodetabek (Jakarta, Bogor, Depok, Tangerang, Bekasi) has reached a critical inflection point. Unlike off-the-shelf residential systems, enterprise-grade horizontal wind turbines operating in West Java’s tropical maritime climate face severe environmental stresses: constant humidity exceeding 85%, saline breeze carrying coastal atmospheric particulates from Teluk Jakarta, monsoon-driven wind turbulence, and low-to-medium mean wind speed regimes ranging between 3.5 m/s and 6.5 m/s at 30-meter hub heights.
Our original equipment manufacturing (OEM) and original design manufacturing (ODM) facility bridges the gap between European direct-drive reliability standards and local Indonesian operational demands. By replacing conventional gearboxes with gearless Direct-Drive Permanent Magnet Generators (PMG) featuring rare-earth Neodymium (NdFeB) magnet rotors, our horizontal wind energy conversion systems eliminate the primary cause of mechanical failure in distributed wind turbines—gearbox shear, oil contamination, and thermal breakdown.
Traditional small-to-medium wind turbines utilize mechanical gearboxes to step up low rotor RPM to high generator RPM. In Jakarta's humid atmosphere, condensate intrusion breaks down gear oil lubricants, leading to premature gear tooth pitting within 36 months. Our OEM horizontal turbines deploy multi-pole direct-drive PMG stators coupled directly to the hub. With zero gear oil requirements and fewer moving parts, our machines achieve operational availability in excess of 98.4% while dramatically lowering Levelized Cost of Energy (LCOE).
Jakarta’s wind profile is dominated by monsoonal shifts and thermal sea-land breezes rather than trade winds. Our ODM engineering team utilizes custom NACA 4412/63-415 aerofoil blade profiles molded from glass-reinforced epoxy (GRP) or carbon fiber composites. Featuring cut-in wind speeds as low as 2.0 m/s and optimized lift-to-drag ratios ($C_l/C_d$), our horizontal rotors capture low-velocity kinetic energy that standard turbines discard as unharvestable turbulence.
Tailored engineering for commercial enterprises, coastal infrastructure, and off-grid facilities across Java’s primary economic engines.
Multinational manufacturing plants operating in Jababeka, MM2100, and Karawang International Industrial City (KIIC) face stringent international ESG scope 2 emission caps alongside escalating PLN peak-hour utility tariffs. Installing rooftop and perimeter direct-drive 5kW to 90kW horizontal wind turbines creates a visible, verifiable on-site clean power hedge. Because industrial power consumption peaks during continuous multi-shift operations, wind generation complements rooftop solar by continuing to feed factory baseload through overcast monsoon periods and night shifts.
Off-grid marine environments across Jakarta’s Thousand Islands (Kepulauan Seribu) depend on expensive, dirty diesel generators with high marine transport logistics costs. Our OEM horizontal turbines feature ISO 12944 C5-M marine anti-corrosion coatings, sealed IP67 generator housings, and dual mechanical/electromagnetic yaw control. Integrated into island microgrids alongside battery storage, our horizontal turbines displace up to 75% of diesel generator operating hours, protecting delicate marine ecosystems while securing reliable ice-making and aeration power for shrimp and fish farms.
Cold chain logistics warehouses around North Jakarta and Tanjung Priok Port require high uninterrupted power quality to prevent food spoilage during tropical heatwaves. OEM micro horizontal turbines installed on boundary towers take advantage of smooth, unobstructed ocean winds blowing off North Jakarta Bay. Coupled with smart grid-tied MPPT inverters, these systems supply reliable clean energy directly behind the meter, reducing monthly maximum demand charges levied by PLN.
The Indonesian renewable energy sector is experiencing unprecedented transformation driven by Presidential Regulation (Perpres) No. 112/2022 on the Acceleration of Renewable Energy Development. For procurement managers, EPC contractors, and factory owners in Jakarta, navigating the localized market dynamics requires a partner who understands both hardware engineering and local regulatory compliance:
| Performance Metric | Direct-Drive Horizontal Axis (HAWT) | Standard Vertical Axis (VAWT) | Jakarta Market Engineering Advantage |
|---|---|---|---|
| Aerodynamic Efficiency ($C_p$) | High (0.42 – 0.48) | Moderate (0.18 – 0.28) | +60% higher energy yield per rotor swept area |
| Cut-in Wind Speed | 2.0 m/s – 2.5 m/s | 3.0 m/s – 3.5 m/s | Captures low-velocity coastal thermal breezes |
| Annual Energy Production (AEP) | Maximum (Continuous multi-speed capture) | Low to Moderate | Shortens ROI payback period to 3.8 - 5.2 years |
| Marine Environment Survival | ISO C5-M Sealed PMG (IP67) | Exposed Bearings (IP54) | Resists severe coastal salt spray along Jakarta Bay |
| SCADA & IoT Integration | Full Remote Cloud Telemetry | Basic Analog Output | Real-time predictive O&M diagnostics |
Founded on a mission to eliminate mechanical complexity, our engineering team pioneered gearbox-free small-to-medium horizontal wind turbines. With thousands of successful installations worldwide across harsh sub-zero temperatures, coastal saltwater environments, and tropical heat, our designs carry a proven 30-year operational life expectancy.
We offer fully flexible OEM/ODM manufacturing. From customized stator winding voltages (12V/24V/48V DC, 220V/380V 3-Phase AC), rotor diameters, custom mounting flanges, paint colors, and private-label branding to smart microgrid firmware integration, we build to your exact tender specification.
We do not merely ship hardware. Our engineering team assists Jakarta distributors and EPC partners with micro-siting assessments, computational wind resource modeling, foundation mechanical stress calculation, electrical single-line diagram (SLD) creation, and remote commissioning support.
Speak directly with our technical application engineers to request CAD drawings, power curves, wind tunnel test reports, or factory inspection access.
Answers to common technical, regulatory, and logistics queries from Indonesian project developers.
As an engineering screening rule, site locations averaging roughly 3.5 m/s to 5.0 m/s at 20-30 meter hub height are economically viable for our low-wind-optimized horizontal turbines. Because our OEM horizontal models feature low cut-in wind speeds of 2.0 m/s and use elevated guyed or free-standing monopole towers, they reach clean, laminar wind blowing above ground clutter such as factory roofs, trees, and warehouses. Our engineers perform complimentary long-term wind data modeling using ERA5 satellite data combined with your interval load file before any order confirmation.
Our horizontal wind turbines incorporate triple-redundant overspeed protection systems. First, the aerodynamic design utilizes passive furling or blade pitch regulation that automatically turns the rotor sideways relative to extreme wind vectors when speeds exceed 25 m/s. Second, our smart MPPT controllers feature automated electromagnetic dump-load braking that locks the generator stator. Third, structural monopoles and hub castings are rated to withstand survival wind speeds up to 60 m/s (Category 4 typhoon equivalent), fully compliant with IEC 61400-2 safety standards.
Yes, full ODM customization of electric power output is a core enterprise capability. We engineer direct-drive permanent magnet alternators for low-voltage battery charging (12V/24V/48V DC) as well as medium-voltage 3-phase AC outputs (220V/380V/415V at 50Hz). Our grid-tied MPPT power conditioning units are certified to match PT PLN grid codes, including anti-islanding protection, low-voltage ride-through (LVRT), and dynamic reactive power control.
Because our direct-drive design removes the gearbox, routine maintenance is dramatically reduced compared to legacy turbines. Maintenance requires only an annual physical inspection of blade leading-edge tape, bolt torque verification, slip-ring brush inspection (or brushless slip-ring verification), and visual housing checks. The remote SCADA portal streams real-time voltage, current, RPM, vibration, and temperature data continuously, allowing your local engineering team in Jakarta to diagnose anomalies long before downtime occurs.
We export under standard Incoterms including FOB, CIF (Tanjung Priok, Jakarta), or DDP (Delivered Duty Paid). All equipment ships in standard sea freight containers with vacuum-sealed vapor barrier packaging and desiccant packs to prevent moisture corrosion during ocean transport. We provide complete HS Code documentation (8502.31.00 for wind powered electric generating sets), Certificate of Origin (Form E for China-ASEAN duty concessions), and full technical specification sheets to streamline Indonesian customs clearance.
Absolutely. We support white-label OEM manufacturing for Indonesian renewable energy developers, EPC contractors, and electrical equipment distributors. We can supply unbranded or custom-branded nacelles, blade sets, control enclosures, and SCADA user interfaces. Furthermore, we provide knock-down kits that enable partial localized manufacturing in Java to help your firm meet local TKDN requirements for public sector tenders.
Whether you require a 400W street light backup turbine, a 5kW commercial rooftop system, or a complete custom 90kW OEM wind-solar microgrid platform for the Jakarta market, our engineering team is ready to assist.
